Environmental Testing Machine
- Product：Environmental Testing Machine
- Catalogue：Equipments
- Views：175610times
- Update：2013-03-26 14:35:27
- Call：+86-769-81664889
| Uses | The products are widely applied to aviation, aerospace, electronics, instrumentation and other industries to do electronic products, materials, components, equipment to do high and low temperature experiments and high temperature storage. | ||||
| Main specifications and technical parameters: | |||||
|
Mode |
IT-DG01 |
IT-DG02 |
IT-DG05 |
IT-DG10 |
|
|
Power |
AC380V/50HZ three-phase five-wire |
||||
|
Thermostat mode |
Balanced way thermostat (BTC + new energy balance of hot and cold conditioning technology) |
||||
|
Set |
Temperature range |
Low temperature -20 ℃ / -40 ℃ / -60 ℃ / -70 ℃ |
High |
||
|
Temperature fluctuation |
±0.5℃ |
||||
|
Temperature Uniformity |
≤2℃ |
||||
|
Temperature deviation |
±2℃ |
||||
|
Cooling rate |
+25℃～-40℃≤90min |
+25℃～-70℃≤90min |
|||
|
Heating rate |
+25℃～+150℃≤60min |
+25℃+～150℃≤60min |
|||
|
Material |
Case Material |
High-quality cold-rolled steel plate (surface spray) |
|||
|
Material within |
Quality imported stainless steel plate |
||||
|
Insulation |
High quality glass fiber + polyurethane rigid foam |
||||
|
Cold |
Refrigerator |
Closed efficient use of imported low-noise compressor |
|||
|
Cooling |
Air |
||||
|
Refrigerant |
Refrigerants (in line with national environmental requirements) R404A/R23 |
||||
|
Refrigeration Accessories |
Original imported mainly refrigeration parts |
||||
|
Volume of the chamber (L) |
01type |
02type |
05type |
10type |
|
|
Studio Size (mm) |
D |
400 |
500 |
700 |
1000 |
|
W |
500 |
600 |
800 |
1000 |
|
|
H |
500 |
700 |
900 |
1000 |
|
|
Safety protection device: |
The whole earth, studio-temperature, over-pressure compressor /overload, short circuit, leakage, phase sequence protection |
||||
|
Standard configuration: |
Φ50mm a test hole, the sample rack, 2 sets of lights one, the cumulative timer 1, the power cord (5m), etc. |
||||
|
Options: |
Dry air purge system, remote monitoring and control of computer software, RS485 or RS232 communication interfaces, recorders, printers |
||||
|
Implementation and to meet the standards: |
GB11158-89 conditions of high temperature chamber technology |
||||
|
GB2423.2-89 experimental high-temperature test method B |
|||||
|
GJB150.3-86 high-temperature experiment |
|||||
|
Uses: |
Widely used in electronics, instrumentation, electrical and electronic products, components for high-temperature experiments, can also be used for non-volatile and non-inflammable and explosive materials drying, heat treatment, aging, and other high-temperature experiments. Several improved design, computer temperature controller. Digital display of temperature, reliability, ease of maintenance, beautiful appearance. |
||||
|
Main specifications and technical parameters: |
|||||
|
Model |
IT-DGL01 |
IT-DGL02 |
IT-DGL05 |
IT-DGL010 |
|
|
Power supply |
AC380/50HZ three-phase five-wire |
||||
|
Installed power (KW) |
3 |
3.6 |
8.5 |
10 |
|
|
Thermostat mode |
Balance the thermostat mode (BTC method) |
||||
|
Operating temperature |
+5℃～35℃ |
||||
|
Performance |
Temperature range |
R-T+20℃～+200℃ |
|||
|
Temperature fluctuation |
±0.5℃ |
|
|||
|
Temperature uniformity |
≤2℃ |
|
|||
|
Temperature deviation |
±2℃ |
||||
|
Heating time |
Room temperature --- 200 ℃ ≤ 90min |
||||
|
Material |
Case Material |
High-quality cold-rolled steel anti-rust treatment (surface spray) |
|||
|
Interior materials |
High-quality stainless steel |
||||
|
Insulation |
High-quality ultra-fine glass wool |
||||
|
Heater |
Quality nickel - chromium alloy heater |
||||
|
Temperature sensor |
pt100 platinum resistance point |
||||
|
Controller |
Imported computer temperature controller |
||||
|
Volume of the chamber (L) |
100 |
200 |
500 |
1000 |
|
|
Studio Size (mm) |
400×500×500 |
500×600×700 |
700×800×900 |
1000×1000×1000 |
|
|
Safety protection device |
Ultra-low temperature protection, grounding, leakage protection, overload protection, fan |
||||
|
Attachment |
Shelf, put (2 sets) |
||||
|
Options |
Recorder, the timing device |
||||
|
Remarks: |
|||||
Spray method:
A: continuous salt spray test machine
B: Programmable salt spray test machine
1, the entire PVC board system, the internal use of advanced three-dimensional reinforcement ring with a production technology, strong structure, solid, never deformation.
2, automatic, manual water system with low water level automatically, manual water level of the reinforcement function, the test is not interrupted.
3, precision glass nozzle, using 4000 hours to ensure no crystal block.
4, are in the same controller board, easy to operate, and at a glance.
5, with dual over-temperature protection, water shortage warning for safety use.
6, inlet temperature controller, digital display, PID control, high stability of platinum temperature probe set, error ± 0.3 ℃
7, the test tank using direct steam heating method, heating speed, shorten the standby time.
8, spray tower with conical diffuser, a guide fog, adjust the amount of fog, and even off the fog and other functions.
9, pressure drums using Henry's law, in order to heated humidification, and provide the necessary laboratory humidity. Salt spray
test machine, chambers, salt spray test box Specifications:
|
Item |
Content
|
||
|
Model |
IT-GHSH120 |
IT-GHSH90 |
IT-GHSH60 |
|
Laboratory size (mm) |
1200*1000*500 |
900*600*500 |
600*450*400 |
|
Carton size (mm) |
1900*1200*1400 |
1415*885*1285 |
1075*630*1185 |
|
Laboratory temperature |
Saline test 35 ℃ + / -1 ℃ / corrosion test 50 ℃ + / -1 ℃ |
||
|
Saturated barrel temperature |
Saline test 47 ℃ + / -1 ℃ / corrosion test 63 ℃ + / -1 ℃ |
||
|
PH |
Salt water test (6.5 to 7.2) corrosion test (3.0 to 3.2) |
||
|
Spray volume |
1.0～2.0ml/h |
||
|
Laboratory relative humidity |
Greater than 85% |
||
|
The concentration of sodium nitride |
5% |
||
|
Laboratory capacity |
600L |
270L |
108L |
|
Salt water tank capacity |
40L |
25L |
15L |
|
Power |
AC220V，1∮，20A |
AC220V，1∮，15A |
AC220V，1∮，10A |
Click to contact customer service
Call：+86-13360654218
