Automatic laminating machine-广东秦泰盛智能化科技有限公司

搜索

公司新闻
行业新闻

AFM-TZ1 Automatic plastic bracket roll material laminating machine

您当前位置：贴标机首页 > Accessory labelling machines > Fully automatic auxiliary material labelling machine

AFM-TZ1 Automatic plastic bracket roll material laminating machine

产品名称：AFM-TZ1 Automatic plastic bracket roll material laminating machine
产品分类：Accessory labelling machines
浏览次数：178224次
更新时间：2022/6/17 14:24:30
咨询热线：133-6065-4218

Automatic plastic bracket roll material laminating machine

Process description
1. Double-sided rubber incoming material is coil material, assemble to the equipment feeding place, tear off the protective film

2. The discharging place of vibration plate is equipped with electrostatic air blowing, and the minimum weight of plastic parts can reach 0.5g discharging)

3. Mount the X.Y.Z.R axis with suction cup to remove the plastic parts at the feeding place of the vibration plate and move the bottom camera

4. Take the position of double-sided adhesive with the head camera.

5. According to the product taken by the camera and the tape position, the system makes a supplementary taste and correction.

6. Accurately mount plastic parts

7. Stretch the double-sided tape directly to the braiding packing machine.

8. The taking parts module of the knitting machine takes the product to the rail material of the feeding tray and puts the product into the knitting belt

9. The receiving tray wraps the products in the braiding belt

AFM-TZ1 Automatic plastic bracket roll material laminating machine

Technical specification
Machine size (length, width and height)	≈15008001500
Service voltage of equipment (V)	AC 220v 50Hz
bleed pressure(Mpa)	>0.6
weight(kg)	>150
power(kw)	>2
floor space(mm²)	Designing for different form factors
precision	+/-0.1
precision	±0.1mm

Equipment composition:

1. Feeding station of double-sided adhesive for rolling material;

2. Mobile paste platform;

3. Plastic support feeding vibration plate;

4. Plastic bracket suction and mounting module;

5. Two visual systems;

6. Finished goods receiving station.

process description：
Manual will roll double-sided adhesive into the equipment, the equipment automatically feed; Vibration plate automatically output plastic support; The laminating module automatically absorbs the bracket and mounts with high precision (±0.1mm) and high speed (1.0-1.3s /PCS) under the coordination of two sets of vision systems; The collecting mechanism realizes automatic recovery of finished products after the completion of mounting. After a roll is completed, the device intelligently reminds personnel to replace the material.

Equipment requirements：
1. Less space occupied by automation, with customer standard equipment

2. All kinds of institutions and special planes need to run smoothly, and there shall be no material leakage and leakage.

3. The equipment shall be safe and reliable, easy to operate, and the noise shall meet the national level 1 standard.

上一个产品

下一个产品

AFM-TZ1 Automatic plastic bracket roll material laminating machine相关内容