Daily maintenance and care of the pcb mobile phone auto-laminating auxiliary material machine

pcb mobile phone automatic paste auxiliary material machine daily maintenance and maintenance


pcb mobile phone automatic labeling auxiliary material machine is characterized by accurate lamination, high efficiency, especially for shaped auxiliary materials, artificially difficult to complete the pcb mobile phone automatic labeling auxiliary material machine can also be completed, the correct daily use and maintenance of maintenance is equally important, today, Guangdong labeling machine editor to review a variety of information, according to a variety of feedback, and in-depth communication with technical personnel, to give you a summary of a few pcb mobile phone automatic labeling Accessories machine routine maintenance and maintenance.


1. pcb mobile phone automatic paste auxiliary material machine mechanical parts can be cleaned with cleaning agent (industrial alcohol) and clean clothes, scrubbing can not be positioned, you can use the air compressor blowing.
3. in the daily start pcb mobile phone automatic paste auxiliary material machine connected to the power supply before, check if there are dirty things on the Fei Da roll material, such as: spanner tool, screwdriver head, etc..
4. carefully observe the pcb mobile phone automatic paste auxiliary material machine switch power situation is not normal, the power plug is not destroyed.
5. can't have anything fall into the pcb mobile phone automatic paste auxiliary material machine equipment inside, otherwise there may be failure problems.
6. pcb mobile phone automatic labeling auxiliary material machine can not be in the wet and cold, too much dust, there is serious pollution of the working environment, in order to prevent the shortening of the product equipment application life.
7. speed control motor application range can not be in very low rate operation, otherwise the motor, electrical equipment is very easy to destroy.
8. scrubbing, pay special attention to carefully observe the pcb mobile phone automatically paste auxiliary material machine is not a loose screw, such as detecting a loose position, should be immediately twisted tight.
9. If the pcb mobile phone automatic labeling auxiliary material machine is not applied for a long time, please pay attention to the pressure labeling camshaft to loosen.
10. If the pcb mobile phone automatic labeling auxiliary material machine is not applied for a long time, please use the automatic labeling machine manufacturer to distribute the machine cover to cover, in order to prevent a good long time bare stained with dust.


The above is the non-standard automatic labeling machine manufacturers to introduce you on the pcb mobile phone automatic labeling auxiliary material machine daily maintenance and maintenance of the content, I hope it will help you.
*** Translated with www.DeepL.com/Translator (free version) ***